Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Boulder City
If you live in Boulder City, your garage door probably isn’t like the ones going up in the newer master-planned subdivisions outside town. Most of the doors we see here hang on Depression-era bungalows and 1950s-’70s ranch homes, and the parts inside them have been through decades of desert sun. We know the 89005 and 89006 blocks well, from the Historic District cottages near the old Bureau of Reclamation housing to the block homes on the flats, and we know what tends to fail on each. When a door stops lifting, you can reach a live person at (844) 797-3654 and get a straight answer on what part failed and what it costs to fix.
Why Servo Garage Doors Summerlin Is Boulder City’s Preferred Garage Door Parts Company
Boulder City is a small town, and word travels through it fast. Homeowners here have watched us photograph the failed part before we quote a replacement, hand over a flat written price before any work starts, and leave a documented photo record of what we found and what we did. That paper trail is Clause 4 and Clause 1 of The Haven Standard, and it’s why people in the Historic District and out toward the dry lake call us back for the next door. Our technicians have up to 11 years of experience, and they work on the same handful of Historic District floor plans often enough to recognize a 1940s jamb bracket on sight. Calls are answered by a live person day or night, including emergencies, and you get a named technician and an on-the-way text rather than a callback window. Every job also carries the 365-Day Done Right Promise: if a repair isn’t right, we make it right. If another company has already handed you a written estimate, bring the paperwork and we’ll give you a free second opinion.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Boulder City

Here’s something you won’t find everywhere: because Boulder City’s Historic District garages were built for 1930s car dimensions, many original wood doors have no torsion spring at all. There’s just rusty jamb hardware and, sometimes, a tired extension spring doing all the work. Bringing one of these doors up to current safety standards often means fabricating and installing a proper spring system, not swapping a like-for-like part off a shelf. That single fact shapes most of the parts work we do in town, and it’s why our Garage Door Parts team keeps the sourcing conversations grounded in what your door actually has rather than what a catalog assumes.
Torsion Spring
A torsion spring is the coiled bar above the door that does the heavy lifting through a cable-and-drum system. In Boulder City, we regularly find old wood doors that never had one, so the job becomes installing a correctly sized torsion assembly and safety cables rather than a quick replacement. On mid-century doors that do have a torsion system, a clean break at the coil usually means the spring has run out its rated cycles under the desert heat.
Extension Spring
Extension springs stretch along the tracks on each side, and they’re the part most likely to snap on Boulder City’s older bungalows after decades of UV exposure and dry heat. These springs store serious energy, which is why we never suggest a homeowner handle one, and why every replacement is paired with a safety cable. Once a south-facing door has lost a spring, the door drops fast under its own weight, so the fix is usually the same day.
Cables & Drums
The cables run from the bottom corners up to the drums that wind the spring tension, and frayed or rusted cable is common on Historic District doors that sit under a beating west sun. When a cable lets go, the door hangs crooked and binds in the track, and running the opener risks bending panels. We inspect the drums and end bearing plates for rust at the same time, since a worn drum will chew through a fresh cable.
Rollers & Hinges
Rollers ride in the track and hinges connect the door sections, and both pick up grit from monsoon dust and wind that blows through town. Gritty rollers bind and then wear prematurely, especially on legacy one-piece or early sectional doors that were never built for the loads a modern opener applies. Replacing them is one of the least expensive fixes we do and often the difference between a door that grinds and one that runs quiet.
Before
AfterTrusted Brands We Service in Boulder City
We service all eight major brands, and in Boulder City you’ll most often see LiftMaster openers retrofitted onto old doors, Chamberlain units on the 1970s ranch homes, and the occasional Raynor or Craftsman system that’s been quietly doing its job for years. We don’t claim to stock parts on a truck. What we do is identify the exact component your door needs and source a compatible replacement fast, which matters more in a town where a lot of hardware is obsolete. If your opener or door brand isn’t one we can source a direct match for, we’ll tell you that up front and lay out the retrofit options in writing.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Parts Problems We See in Boulder City Homes

- Original wood doors with no torsion spring. These doors were nailed in place and rely on rusty jamb hardware that has to be brought up to current safety standards. Retrofitting a proper spring assembly and safety cables is often the only safe path.
- Sun-baked opener electronics and photo-eyes. South- and west-facing garages cook the logic board and the photo-eye sensors, which is why doors here intermittently refuse to close in the hottest months.
- Gritty tracks and rollers from monsoon dust. Wind-blown dust works into the track and rollers, causing binding and premature wear that’s especially hard on legacy one-piece doors.
- Snapped extension springs after decades of UV and dry heat. When a Boulder City door suddenly won’t lift, a broken extension spring or an over-cycled torsion spring is usually what’s behind it.
Here’s how a typical job in town goes. A homeowner walks out, hits the button, and the door won’t budge. A qualified technician starts by checking the door’s balance, then inspects the cables, drums, and end bearing plates for rust or fraying, and either sources a compatible spring or recommends a retrofit when the original hardware is obsolete. Because so many of these doors were nailed in place with no torsion system, the repair may mean installing a fresh spring assembly and safety cables rather than swapping a single part.
Pricing for Garage Door Parts in Boulder City, NV
We put the price range in dollars on the page because “call for a quote” doesn’t tell you anything. In Boulder City, a typical spring repair runs $180 – $340, a cable repair $130 – $250, roller replacement $110 – $220, and track realignment $120 – $240. A panel replacement, which comes up on sun-warped wood doors, lands at $250 – $500. What moves the number is real: whether the door has an existing torsion system or needs one fabricated, how much rust is in the jamb hardware, and whether the drums need replacing alongside the cables. Every job gets a flat, written price and written scope before any work starts, per Clause 1, so the invoice matches the quote. Estimates are free.
| Service | Price Range (Boulder City) |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
| Panel Replacement | $250 – $500 |
We Also Serve Cities Near Boulder City

Boulder City sits close enough to the metro that we also handle garage door parts work in nearby Henderson, Whitney, Paradise, and Enterprise. The housing stock changes as you head north and west, but the same written-price-first approach comes with us. If you’re looking for Garage Door Parts in Boulder City or anywhere nearby, reach out and we’ll tell you what applies to your door.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Boulder City

Usually not as a simple swap, because there’s no torsion system to replace in kind. Many of these Historic District doors were built for 1930s car dimensions and hung on jamb hardware with, at most, a tired extension spring, so bringing the door to current safety standards means fabricating and installing a proper spring assembly plus safety cables. A technician confirms door balance and inspects the jamb hardware first, then quotes the retrofit in writing. Call (844) 797-3654 for an exact quote – estimates are free.
Intense desert sun and 100°F-plus summers are the main reason. Springs on south- and west-facing doors run hotter, and the same heat that warps wood panels also strains the spring’s rated cycles, so they break sooner than on a shaded door in a cooler climate. Dry air and monsoon dust add grit that speeds wear on the surrounding hardware. Call (844) 797-3654 and we’ll talk through what your door is doing.
A broken spring is usually obvious: the door is dead weight when you lift it by hand, or you find a clean break at the coil. An adjustment is the answer when the door moves but feels heavy, binds, or reverses for no clear reason, which often traces to a gritty roller or a photo-eye knocked out of line. A technician checks balance and the cables and drums to tell the two apart before quoting anything. Call (844) 797-3654 for an exact quote.
On the older doors here, the common replacements are extension springs, cables and drums, rollers and hinges, and jamb hardware that’s rusted past adjustment. When a door never had a torsion spring, the job adds a fresh torsion assembly and safety cables. Sun-warped wood panels often need replacing too, and because of the town’s historic-preservation rules the new panel usually has to visually match the original door style. Call (844) 797-3654 – estimates are free.
Yes, and it’s common on Boulder City’s mid-century ranch homes. A new LiftMaster or Chamberlain opener can go onto a legacy one-piece or early sectional door once the door’s balance, springs, rollers, and hinges are sound, because a modern opener puts more load on aging hardware. We quote the opener and any parts the door needs in one written scope before work starts. Call (844) 797-3654 for an exact quote.
Whether your door is a 1940s Historic District original or a 1970s ranch door on the flats, we’ll photograph the failed part, name the price range in writing, and leave you a documented record of the work. Call Servo Garage Doors Summerlin at (844) 797-3654 for a free estimate on garage door parts in Boulder City.
Written by the team at Servo Garage Doors Summerlin.