Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateClopay Roller Replacement: The Summerlin Owner’s Guide
Replacing the rollers in a Clopay garage door in Summerlin typically costs $110 to $220 installed, and we can usually do it the same day you call. A roller swap is one of the fastest fixes we handle. The catch is getting the right roller for your door.
Owners here rarely go looking for roller trouble. It finds them. The door starts to grind or shimmy on one side. Then a neighbor, or the technician who came out for an unrelated tune-up, points at a roller that has worn flat at the wheel. In Summerlin we see this most on doors that face west, catching full afternoon sun from Red Rock and running hot through our long, dry summers. The wheel’s nylon or steel surface takes a beating, the axle loses its round, and the door no longer rolls smooth in the track.
Which Clopay Models This Applies To
Clopay builds a lot of doors, and the roller spec changes with the model line. Most residential doors – the Canyon Ridge, Coachman, Gallery, and Classic collections – use a 2-inch nylon roller with an 11-ball-bearing or plain-bushing axle. Steel doors in the older building stock around Summerlin often carry a 2-inch steel roller. Premium models sometimes take a 2.5-inch roller on the heavy top section. That half-inch difference decides whether the door runs quiet or binds.
To pin down the right part, read the label stuck to the inside face of your door. It lists the model and series, which tells us the original roller spec. If the label is gone, measure the existing roller’s wheel diameter and the track depth. We do this before quoting anything, because a Clopay door is not interchangeable with a Wayne Dalton or Amarr door at the roller. On a Clopay specifically, the aftermarket decision holds up: a quality sealed-bearing nylon roller from a known supplier matches OEM performance for less than the dealer part, and in our experience it lasts just as long in our climate. We don’t claim to carry parts on a truck. We source the exact roller after we’ve measured yours and confirm it against the door’s model line. Servo Garage Doors Summerlin is an independent service provider and is not affiliated with Clopay.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Signs Your Clopay Roller Replacement Is Failing

- Grinding or scraping as the door moves. The bearing or bushing has worn out, so the roller is dragging on its stem instead of spinning freely. That noise is metal against metal.
- The door shakes and sways on its way up. A flattened wheel, worn out of round, no longer rides the track evenly. You’ll feel the vibration through the door and hear it in the opening mechanism.
- A visible flat spot or crack in the roller wheel. This is the clearest single sign. Nylon rollers can crack; steel rollers can flat-spot after enough cycles.
- The door pulls hard to one side or binds near the middle. One seized roller throws off the whole section’s alignment. It usually shows up as a door that hangs at the same point every time.
- Loose play when you wiggle the roller in its hinge. A worn stem or a wallowed hinge slot lets the roller rock instead of tracking true, which accelerates wear on the track itself.
The cost of ignoring the last two is real: a seized roller grinds the track, and a re-tracked or replaced track runs higher than the roller job you put off.
Before
AfterReplacement Cost & What’s Included
Roller replacement in Summerlin runs $110 to $220 installed. That flat range covers parts and labor together, not a parts price plus a separate labor surprise. Where you land inside it depends on three things: how many rollers your door carries (most single-car Clopay doors take 10 to 12), whether we’re replacing all of them or a failed set, and the roller grade we match to your model.
- Roller replacement (all rollers) – $110 to $220
- Related cable repair, if a failed roller has strained the cable – $130 to $250
- Track realignment, if a binding roller bent the track – $120 to $240
- Spring repair, if the door’s balance is off – $180 to $340
Every job gets a flat, written price and written scope before any work starts. You see the failed roller before we quote the replacement – we photograph it and hand you the record. The work carries the 365-Day Done Right Promise: if it’s not right, we make it right. If another company has already written you an estimate, bring it in for a free second opinion.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?

A few things are safe to check on your own. Open the door and watch each roller in the track. Note which ones squeal, shake, or show a flat spot. Wiggle each one gently in its hinge to feel for play. That tells you which rollers failed without you touching anything under tension.
Where DIY goes wrong is the swap itself. Swapping rollers means relieving the door’s spring tension or propping the door safely, and the torsion spring and cables on our doors hold dangerous energy. A door that slips during the job has crushed fingers and worse. We’d rather you didn’t test that. We’re insured and bonded, our technicians are background-checked, and every technician is up to 11 years into the trade. Call (844) 797-3654 and a real person will pick up, day or night, for emergency calls included.
FAQs
Plan on seven to ten years for quality nylon rollers, less for steel ones, in Summerlin’s climate. Our dry heat and heavy afternoon sun on west-facing doors are hard on the wheel surface, and a door that opens and closes several times a day wears its rollers faster. If your Clopay door is more than eight years old and has never had a roller change, have them checked.
Usually not, and it’s rarely worth trying. A worn bearing, a flat-spotted wheel, or a cracked roller is a replacement part, not a repair part. When a roller is only loose in a worn hinge slot, changing the hinge sometimes fixes it. Call (844) 797-3654 and we’ll tell you which one you’re looking at.
A full set of rollers on a standard single-car Clopay door usually takes about an hour once we’re on site. A two-car door takes a little longer. We confirm the part against your door’s model at the visit, then work and document as we go.
We identify the roller spec from your door’s model label, or by measuring the wheel and track if the label is gone, then match a quality replacement to that spec. We don’t claim to carry Clopay parts on a truck. We confirm the exact part your door takes before we quote, and the written scope names it. Call (844) 797-3654 for a free estimate.
Get Your Clopay Rollers Sorted

If your Clopay door has gone noisy, shaky, or stiff, a roller job may be all it needs, priced at $110 to $220 installed with a written quote before we touch anything. We answer live, 24/7, and we’ll photograph what we find so you can see the failed part yourself before you spend a dollar. In Summerlin and the surrounding neighborhoods, call (844) 797-3654 for a free estimate. We work on LiftMaster, Chamberlain, and Genie openers too, so everything on your door stays covered in one visit.
Written by the team at Servo Garage Doors Summerlin, serving Summerlin and nearby areas.