Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateCraftsman Cable & Drum Replacement: The Summerlin Owner’s Guide
Craftsman cable and drum replacement in Summerlin typically runs $130 – $250 installed, and most jobs we see are done the same day. Cables and drums are the parts that spool your door’s lift cable and keep it level as it travels; when one lets go, the door usually drops on one side or stops moving altogether. Owners in Summerlin tend to find this out the loud way: a snap from the garage, a door sitting crooked, or a cable that’s come off the drum and is lying loose along the track. Nobody schedules this. It just happens, usually on a Saturday.
Which Craftsman Models This Applies To
Craftsman sold residential openers and door hardware under a lot of model numbers over the years, and the cable-and-drum assembly itself is usually tied to the door, not the opener. So the opener’s model number (a 41A-series logic board, a 139.xxxxx chain drive) won’t tell you which drum you need. What matters is the door: its weight, its track configuration, and whether the drums are the standard 400-8 or the taller 5250-style used on heavier doors.
Here’s the compatibility gotcha that trips people up: Craftsman-branded door hardware from the 1990s and 2000s often used drums with a specific cable-groove depth matched to a 1/8-inch or 3/16-inch cable. Swap in the wrong cable diameter and the cable wraps unevenly, jumps the groove, and fails again inside a year. If your door has a manufacturer label inside the jamb, read it. If it doesn’t, measure the door width and the cable diameter before ordering anything.
On the OEM-versus-aftermarket question: Craftsman no longer makes most of the older cable-and-drum parts, so what you’ll find are quality aftermarket equivalents made to the same spec. That’s fine. The spec is what matters, not the logo stamped on the drum. Servo Garage Doors Summerlin is an independent service provider, not affiliated with Craftsman; we match the part to your door, not to a brand promise.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Signs Your Craftsman Cable & Drum Replacement Is Failing

- A snap or pop from the garage, then a crooked door. That’s usually a cable letting go. The drum stops holding tension on one side, and the door sags on that corner.
- A cable sitting loose or off the drum. If you can see the cable draped along the track or wrapped wrong around the drum, stop operating the door. Running it in this state bends the drum and can whip the cable.
- Frayed strands poking out of the cable jacket. Cables in Summerlin fail faster than most people expect because the dry desert air and 100-plus-degree garage heat dry out the cable lubricant, and once the strands start rubbing they fray from the inside out.
- A door that binds or grinds on one side. A worn drum groove lets the cable ride off-center. You’ll hear it before you see it, and it puts uneven load on the torsion spring.
- A drum with a visible crack or worn groove. The drum is cast metal; it cracks rather than bends. A hairline crack at the hub is the last warning before it fails completely.
Before
AfterReplacement Cost & What’s Included
Cable and drum replacement in Summerlin runs $130 – $250 for a standard residential job. What moves you within that range: whether it’s one cable or both, whether the drum needs replacing alongside the cable, and whether the door is a heavier insulated model that takes longer to re-tension safely. A standard cable replacement sits at the low end. A cable and drum replacement with the torsion spring re-wound and re-balanced sits at the top.
Every job is quoted as a flat, written price with a written scope before any work starts, per Clause 1 of The Haven Standard. That means you see the number before the technician touches the door, and the technician photographs the failed cable or drum before quoting the replacement, per Clause 4. The price you agree to is the price you pay.
The 365-Day Done Right Promise covers the work: if it’s not right, we make it right. Every visit includes a documented photo record of what we found and what we did, delivered to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?

Some things you can check safely: look at the cable for fraying, confirm the door is level by eye, check whether the cable is seated on the drum. Stop there.
The cable and drum work under tension from the torsion spring, and that spring holds enough stored energy to seriously injure you if it’s released wrong. Loosening a cable set screw before the spring is de-tensioned can let the drum spin free and the cable whip. This is true whether the door is Craftsman or not; the danger is in the spring, not the brand. We’re not going to talk you through something that can cost you a hand.
If you’ve seen a snap, a loose cable, or a crooked door, stop operating the door and call us at (844) 797-3654. Same-day cable and drum replacement is available in Summerlin, and the estimate is free.
FAQs
How long should a Craftsman cable and drum last in Summerlin? A cable typically lasts 7 – 10 years in a normal climate; in Summerlin’s dry heat, expect the low end of that, closer to 6 – 8 years, and shorter on doors that run several times a day. The dry air and thermal cycling wear the cable faster than humidity would. Call (844) 797-3654 for an exact quote – estimates are free.
Can a failed cable or drum be repaired instead of replaced? Usually not. A frayed cable or a cracked drum can’t be re-tensioned or repaired with any confidence. Cables and drums are inexpensive parts; labor is the bulk of the cost, so replacement is the right call nearly every time. Call (844) 797-3654 to confirm on your door.
How long does the swap take? Cable and drum replacement on a standard single-car door typically takes 45 – 90 minutes, including re-balancing. Heavier double doors or a door that needs the torsion spring re-wound take closer to two hours. Same-day is available most days.
How do you source the part for my Craftsman door? We match cable diameter, drum groove depth, and door weight to the door – not to an opener model number. Most older Craftsman door hardware has a quality aftermarket equivalent made to spec. Call (844) 797-3654 and we’ll tell you what your door needs.
What Getting This Fixed in Summerlin Looks Like

We also service LiftMaster, Chamberlain, and Genie hardware, so if you’ve got two doors and one is a different brand, one visit covers both. The cable-and-drum job is one of the more predictable repairs in this trade: a known failure, a known fix, a known price. What we add is the paper trail. You see the failed part photographed before the quote, you see a flat written price before work starts, and you get a photo record when we leave. If you’ve got a written estimate from another company, bring it and we’ll give you a free second opinion on it.
Call (844) 797-3654 for a free estimate on your Craftsman cable and drum replacement in Summerlin, Henderson, or anywhere nearby. Lives are answered 24/7, including emergency calls.
Written by the team at Servo Garage Doors Summerlin, serving Summerlin and nearby areas.