A Servo company - serving Summerlin, NV

Craftsman Roller Replacement in Summerlin, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Craftsman Roller Replacement: The Summerlin Owner’s Guide

Replacing the rollers on a Craftsman garage door in Summerlin typically runs $110 – $220 installed, and most jobs are finished the same day you call. We match the roller to your Craftsman model, photograph the worn parts before quoting, and hand you a written price before anyone touches the door.

Call (844) 797-3654

Owners usually discover this problem the same way. The door gets loud. A grinding or rumbling starts about halfway up, or the door shudders like it’s catching on something. Some people notice a rhythmic thud first and assume the opener is going. In Summerlin, where we regularly see twenty-year-old steel rollers ground flat by heat and desert grit, the actual culprit is almost always the rollers, not the opener. When they wear out of round, they stop rolling and start dragging, and that drag wears everything else faster.

Which Craftsman Models This Applies To

Craftsman never made its own rollers. Every Craftsman-labeled sectional door uses one of a handful of standard roller sizes, and that’s good news for you. The most common are 2-inch and 3-inch stem rollers with a 7/16-inch stem diameter, and nearly every Craftsman door sold through the home-improvement channel since the 1990s uses one of these. If your door won’t lift easily by hand or the rollers rattle in the track, the stem size and wheel diameter are what matter, not the label on the door.

Here’s the compatibility gotcha that trips up online buyers. A “2-inch roller” describes the wheel, but the stem length and wheel profile vary between door manufacturers, so a budget roller measured to the wrong spec will wobble in the hinge or bind in the track. We measure the stem and the wheel against your actual door before ordering, because Craftsman relabeled doors from more than one maker over the years. On the OEM question: an original Craftsman replacement roller is fine, but a quality nylon aftermarket roller typically outlasts the original steel one in Las Vegas heat, runs quieter, and costs less. We’ll tell you which fits your door and why. Servo Garage Doors Summerlin is an independent service provider, not affiliated with Craftsman.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Signs Your Craftsman Roller Replacement Is Failing

Technician performing professional garage door spring repair and maintenance
Signs Your Craftsman Roller Replacement Is Failing
  • Grinding or rumbling as the door moves. A worn roller has lost its bearing tolerance and is scraping the track instead of rolling. The noise usually gets worse the higher the door travels.
  • Visible flat spots or cracks on the roller wheel. When the wheel goes out of round, it thumps once per rotation. You can often see the flat spot with the door up and the opener disconnected.
  • The door shakes or jerks on its way up. A seized or frozen roller drags rather than rotates, which loads the opener and the hinges unevenly.
  • The door binds and reverses, or feels stiff by hand. Dragging rollers add resistance the opener reads as an obstruction. That safety reverse is doing its job, but the rollers caused it.
  • Rust or grit on the stem and wheel. Summerlin’s dust and dry heat chew through a steel roller’s lubrication fast, and once it’s dry the wheel wears on the stem. Damaged rollers also accelerate wear on the track, hinges, and torsion spring.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Plan on $110 – $220 for a Craftsman roller replacement in Summerlin, parts and labor together. The range moves with a few honest variables: how many rollers need replacing, whether the door takes standard 2-inch or heavier 3-inch rollers, and whether a stretched or bent track has to be corrected while we’re in there. Nylon rollers cost a little more than steel and last longer here.

What we’re pricing Typical Summerlin range
Roller replacement (parts + labor) $110 – $220
Track realignment, if needed $120 – $240
Spring repair, if found worn $180 – $340
Cable repair, if found worn $130 – $250

You get a flat, written price and a written scope before any work starts, so there’s no invoice surprise afterward. The job closes with a documented photo record showing what we found and what we replaced, and the work is covered by our 365-Day Done Right Promise. If a repair isn’t right, we make it right.

DIY or Call Us?

professional garage door repair service
DIY or Call Us?

Some checking is safe. With the door fully closed and the opener disconnected, you can look at the rollers, note any flat spots, cracks, or rust, and gently test whether a wheel spins freely by hand.

Where DIY goes wrong is the swap itself. Rollers sit under the door’s full tension, and a door that’s up on a worn or damaged torsion spring can drop without warning. That spring is storing enough energy to cause serious injury, so on any Craftsman door we treat it as a professional-only job. Replacing rollers also means lifting the door safely and getting each new roller seated correctly in its hinge, which is where a rushed DIY job bends a track or leaves a wheel binding. Call us at (844) 797-3654 and we’ll take it from there. We service Craftsman along with LiftMaster, Chamberlain, Genie, and the other major brands.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Garage Door help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 797-3654
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Servo Garage Doors Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch