Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Summerlin Homeowners
When a torsion spring lets go, the door won’t lift and the car is trapped under The Ridges; when a cable frays on a carriage door in Red Rock Country Club, the panel starts dragging on one side and grinds the track. Garage door repair in Summerlin is one of the few trades where waiting almost always costs more than calling. We’re Servo Garage Doors, and our technicians have up to 11 years of experience; every technician is background-checked, and the license number sits on the page, not buried in fine print. Same-day repair is available across Summerlin, and calls are answered by a live person, 24/7. Call (844) 797-3654 and we’ll price it before we touch it.
What Our Garage Door Repair Service Includes
Every visit is a priced job, not an hourly meter: the written scope and flat price arrive before any tool comes out of the bag, per Clause 1 of The Haven Standard. Here’s what we actually fix and when each one tends to show up in Summerlin homes.
Panel Replacement
A panel is a single horizontal or vertical section of the door face, and when one is dented, buckled, or separating at the seam, the door doesn’t just look wrong, it can throw off the balance of the whole slab. You need replacement when a panel is creased past what a dent repair can address, when hail or a car bumper has folded an intermediate section, or when a steel face has rusted along the bottom stile after years of our dry desert air. On a Summit Club toll-gate knock, the bent section almost always sits in the heavier middle rows. We photograph the damaged panel, note the profile and color on the written scope, and price the replacement as its own line so you can see exactly what the section costs.

Spring Repair
A torsion spring is the wound coil above the door that counterbalances the slab’s weight, and it is the single most common failure on Las Vegas Valley garage doors because the dry, thermally stressed environment shortens a spring’s working life compared to what a humid climate would give it. You need spring repair the moment the door feels dead-lifting-heavy or you hear a sharp snap from the ceiling; continuing to run the opener on a broken spring burns out the gear and turns a spring job into an opener replacement. Springs work under extreme tension, and we treat them that way: this is not a component to touch without the right winding bars and technique. Our technicians photograph the failed coil, measure the wire gauge, and only then quote the replacement.

Cable Repair
Cables lift and stabilize the door along the tracks, and a frayed or snapped cable can send a door down on one side, jam it at an angle, or drag a panel off the straight. You need cable repair when you see a loose, kinked, or separated strand, hear a pop on one side, or find the door sitting crooked. The drums and cables are under the same spring-loaded tension as the springs themselves, and a slipping cable is a real hazard rather than a nuisance. We inspect the full cable run, tag the failure by location, and make sure the drums and bottom brackets are sound before we replace anything.

Track Realignment
Tracks are the metal rails the rollers ride in, and when they’re bent, spread, or out of square, the door scrapes, stutters, or refuses to close flush. You need realignment when a door has been backed into, when a garage had a heavy object lean against a rail, or when the door has been dragging for months and the opening has widened at the curve. In Summerlin, windblown grit and the heat cycle can also knock a track out of true along the bottom section. We check plumb and level along the full run and reset the rails so the door rides clean before we bill a single repair line.
Roller Replacement
Rollers are the small wheels that carry the door in the track, and worn steel or nylon rollers chatter, screech, and eventually flat-spot until the whole door sounds and feels rough. You need replacement when the door rattles on the way up, when the movement is jerky rather than smooth, or when rollers visibly wobble in the hinge. Bad rollers accelerate wear on the track and the hinges, which is why we price rollers as a line item rather than a vague “tune-up” charge. We replace them in matched sets so the door runs true.
Sensor Calibration
Safety sensors are the two small eyes at the bottom of the track that stop the door if something crosses the opening, and misaligned or dirty sensors are the most common reason a door reverses for no visible reason. You need calibration when the door starts up, drops a foot, and goes back, or when the opener light flashes a fault code at you. Sun angle matters here: a low west-facing afternoon sun can blind an older sensor pair, and we’ve seen that exact problem on several doors in Summerlin’s west-facing openers. We re-aim the eyes, verify the beam against the opener’s own test cycle, and confirm the safety reverse works before we leave.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair

Most of the openers we meet in Summerlin are LiftMaster units, often the belt-drive models that run quiet enough to sit under a primary bedroom without complaint. We know where those wear: the trolley carriage that rides the rail, the gear and sprocket assembly inside the head, and the logic board that can toss a fault when a sensor is unhappy. If your door runs on a LiftMaster, we can usually tell from the symptoms which part has failed before we test it.
Craftsman openers are the other common sight on homes built in the Valley’s tract years, and their fail pattern is distinctive: a stripped gear after years of opening a door whose spring was already weak. Raynor and Chamberlain doors and operators show up too, and each brings its own quirks at the track brackets and the limit switch. Whether you have a Craftsman, a Raynor door, or any other make, we can help, and we photograph what failed on your door before quoting the fix.
Before
AfterSigns You Need Garage Door Repair Right Now
Some failures are cosmetic. Others are the door telling you it’s about to cost more. These are the signals that mean a call today, not next month.
- Loud snap and a door that won’t lift. That’s usually a broken torsion spring, and it’s the most urgent call we get. Every cycle on a dead spring is friction and stress on the opener gear, so this is the one to stop using immediately.
- Door hanging crooked or one side dragging. A snapped or stretched cable, or a track knocked out of square, shows up this way. Running a crooked door can pull a panel out of the track and damage the panel itself, which turns the repair into a bigger one.
- Opener reverses before the door hits the floor. Either a sensor is misaligned or something is obstructing the beam, and in either case your door’s safety stop is compromised. Get it checked before someone walks or drives under it.
- Grinding, scraping, or a popping sound on the way up. Usually worn rollers, a dried hinge, or a bent track section. These are cheap fixes when caught early and track-and-panel damage when left alone.
- Door sitting off its line at the close. One side sealing before the other, or a gap at the bottom that lets our summer heat in, often means the door is off-level and needs realignment before something bends.
Our Garage Door Repair Process – Step by Step

- 1
We answer with a person, not a menu. Call and a live human picks up, 24/7. We log the symptoms, confirm the address, and give you a realistic window before a technician is dispatched.
- 2
We inspect and document. On arrival, the technician walks the door, the tracks, the openers, and the counterbalance system, and photographs the failed component along with the surrounding parts. That record is the basis for everything that follows, which is exactly why Clause 4 requires it.
- 3
We quote a written price and scope before any work starts. This is where most of the trade differs from us. The scope names the parts and the labor; the price is flat and written; you approve it before the technician picks up a tool.
- 4
We do the repair. For a spring or cable, we set the door clear, replace the failed component, and rebalance the door before testing it through several full cycles. The technician uses a cycle test, measures the door’s drop, and checks the sensors against the opener’s own reverse test.
- 5
We hand you the record. Before we leave, you get the photo documentation of what we found and what we installed, plus a written warranty on the repair and the terms of the 365-Day Done Right Promise. If it fails within the year, we make it right, backed by The Haven Standard and its terms, not by a handshake.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Summerlin?
Garage door repair in Summerlin runs $150 – $600, with the wide majority of jobs landing in the lower half of that range. Here’s the market as we see it, price by price:
| Repair | Typical range in Summerlin | What drives it |
|---|---|---|
| Spring repair | $180 – $340 | Number of springs, wire gauge, high-cycle vs standard |
| Cable repair | $130 – $250 | One cable vs the pair, drum condition |
| Opener repair | $120 – $320 | Logic board, gear, carriage, or sensor fault |
| Panel replacement | $250 – $500 | Panel position, door profile, color |
| Track realignment | $120 – $240 | Single rail vs full run, extent of bend |
| Roller replacement | $110 – $220 | Number of rollers, hinge condition |
A broken spring is the single most common repair we make in Summerlin, and because it’s a mechanical failure with a known part, it’s also one of the most predictable to price. The repair costs more when the door is heavier or the opener has already taken damage, which is why the technician’s photograph matters: it shows you the failed part and the state of the parts around it before anyone quotes a replacement. What drives a quote up is usually not the labor but a second failure hiding behind the first. What keeps it down is catching it early and not running the door on a dead spring.
Every price is written and agreed before work starts, so there’s no scenario where the invoice comes in higher than the quote you approved. No surprise line items, no “while we’re in there” upsells. If a competitor has already given you a written estimate, bring the paperwork and we’ll give you a free second opinion on it. Estimates are free; call (844) 797-3654 for an exact price.
Garage Door Repair Near Summerlin – Our Service Area

We cover Summerlin and the surrounding west and northwest Valley, including Spring Valley, Las Vegas, Enterprise, and Henderson, plus the wider metro out to North Las Vegas and Boulder City. Response times depend on where you are and what the day looks like, but a repair call in Summerlin or Garage Door Repair in Spring Valley is typically handled the same day. If you’re in a gated community in The Ridges or Red Rock Country Club, tell us the gate code when you call and we’ll have it ready for dispatch. For the wider metro, see Garage Door Repair in Las Vegas.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Summerlin

Garage door repair covers the mechanical and safety components of the door and its opener: torsion springs, cables, rollers, hinges, tracks, panels, and the sensors and opener parts that control the door. It doesn’t include a full replacement, which is a scheduled job, not a repair call. If you’re not sure which one you need, we’ll tell you after we’ve looked at it, and the assessment is free.
Most repairs take one to three hours, depending on the component. A broken spring is usually under two hours, including the balance test; a panel replacement or a track realignment can take longer because it needs the door checked through full travel after installation. We confirm the scope and the time before we start, so you’ll have a working door and a written record by the end of the visit.
Garage door repair in Summerlin runs $150 – $600, with most jobs falling between $150 and $350. Spring repairs are $180 – $340, cable repairs $130 – $250, and roller replacement is on the low end at $110 – $220. The written price and scope reach you before any work starts, and that number doesn’t move after you approve it. Call (844) 797-3654 for an exact quote, since estimates are free.
Yes. We service LiftMaster and Craftsman equipment, along with Chamberlain, Genie, Wayne Dalton, and Raynor doors and operators. We know where each brand wears: the LiftMaster trolley carriage and gear assembly, the Craftsman drive gear, and the limit switch on older Chamberlain units. Whether it’s a logic board fault or a sensor issue, we diagnose from the symptom and photograph the failed part before quoting.
In most cases, yes. Spring and cable failures are the calls we treat as emergencies, and we take them 24/7 with a live person on the phone, not a recording or a callback window. We’ll tell you straight on the call whether we can get to you today and what the visit will involve before you agree to anything. Call (844) 797-3654 for a same-day dispatch.
Every repair is covered by the 365-Day Done Right Promise: if it isn’t right, we come back and make it right. That promise is backed by The Haven Standard and its terms on paper, not by a verbal agreement at the door. You receive the written warranty and the photo documentation on the same visit.
Clear the garage floor around the door and the tracks, and make sure the car is out if the door won’t open under its own power. Tell us when you call if you’re in a gated community, and have the gate code ready. If you have an existing written estimate from another company, have that on hand, and we’ll include the free second opinion when we’re out. For general service info, see our home page.
Schedule Your Garage Door Repair Service in Summerlin Today
A door that’s dragging, grinding, or refusing to lift is a repair that gets more expensive the longer it runs. Call (844) 797-3654 and a live person will answer, day or night, on a holiday or not. We’ll give you a free estimate, a written price before any work starts, and the photo record when we leave. If you’ve got another company’s written quote in hand, bring it and we’ll give you a free second opinion. No obligation, no pressure, no surprises on the invoice. That’s the point of Garage Door Repair in Summerlin done right.
Written by the team at Servo Garage Doors Summerlin.