A Servo company - serving Summerlin, NV

Clopay Roller Replacement in Summerlin, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Clopay Roller Replacement: The Summerlin Owner’s Guide

Replacing the rollers in a Clopay garage door in Summerlin typically costs $110 to $220 installed, and we can usually do it the same day you call. A roller swap is one of the fastest fixes we handle. The catch is getting the right roller for your door.

Call (844) 797-3654

Owners here rarely go looking for roller trouble. It finds them. The door starts to grind or shimmy on one side. Then a neighbor, or the technician who came out for an unrelated tune-up, points at a roller that has worn flat at the wheel. In Summerlin we see this most on doors that face west, catching full afternoon sun from Red Rock and running hot through our long, dry summers. The wheel’s nylon or steel surface takes a beating, the axle loses its round, and the door no longer rolls smooth in the track.

Which Clopay Models This Applies To

Clopay builds a lot of doors, and the roller spec changes with the model line. Most residential doors – the Canyon Ridge, Coachman, Gallery, and Classic collections – use a 2-inch nylon roller with an 11-ball-bearing or plain-bushing axle. Steel doors in the older building stock around Summerlin often carry a 2-inch steel roller. Premium models sometimes take a 2.5-inch roller on the heavy top section. That half-inch difference decides whether the door runs quiet or binds.

To pin down the right part, read the label stuck to the inside face of your door. It lists the model and series, which tells us the original roller spec. If the label is gone, measure the existing roller’s wheel diameter and the track depth. We do this before quoting anything, because a Clopay door is not interchangeable with a Wayne Dalton or Amarr door at the roller. On a Clopay specifically, the aftermarket decision holds up: a quality sealed-bearing nylon roller from a known supplier matches OEM performance for less than the dealer part, and in our experience it lasts just as long in our climate. We don’t claim to carry parts on a truck. We source the exact roller after we’ve measured yours and confirm it against the door’s model line. Servo Garage Doors Summerlin is an independent service provider and is not affiliated with Clopay.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Signs Your Clopay Roller Replacement Is Failing

Technician performing professional garage door spring repair and maintenance
Signs Your Clopay Roller Replacement Is Failing
  • Grinding or scraping as the door moves. The bearing or bushing has worn out, so the roller is dragging on its stem instead of spinning freely. That noise is metal against metal.
  • The door shakes and sways on its way up. A flattened wheel, worn out of round, no longer rides the track evenly. You’ll feel the vibration through the door and hear it in the opening mechanism.
  • A visible flat spot or crack in the roller wheel. This is the clearest single sign. Nylon rollers can crack; steel rollers can flat-spot after enough cycles.
  • The door pulls hard to one side or binds near the middle. One seized roller throws off the whole section’s alignment. It usually shows up as a door that hangs at the same point every time.
  • Loose play when you wiggle the roller in its hinge. A worn stem or a wallowed hinge slot lets the roller rock instead of tracking true, which accelerates wear on the track itself.

The cost of ignoring the last two is real: a seized roller grinds the track, and a re-tracked or replaced track runs higher than the roller job you put off.

BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Roller replacement in Summerlin runs $110 to $220 installed. That flat range covers parts and labor together, not a parts price plus a separate labor surprise. Where you land inside it depends on three things: how many rollers your door carries (most single-car Clopay doors take 10 to 12), whether we’re replacing all of them or a failed set, and the roller grade we match to your model.

  • Roller replacement (all rollers) – $110 to $220
  • Related cable repair, if a failed roller has strained the cable – $130 to $250
  • Track realignment, if a binding roller bent the track – $120 to $240
  • Spring repair, if the door’s balance is off – $180 to $340

Every job gets a flat, written price and written scope before any work starts. You see the failed roller before we quote the replacement – we photograph it and hand you the record. The work carries the 365-Day Done Right Promise: if it’s not right, we make it right. If another company has already written you an estimate, bring it in for a free second opinion.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

professional garage door repair service
DIY or Call Us?

A few things are safe to check on your own. Open the door and watch each roller in the track. Note which ones squeal, shake, or show a flat spot. Wiggle each one gently in its hinge to feel for play. That tells you which rollers failed without you touching anything under tension.

Where DIY goes wrong is the swap itself. Swapping rollers means relieving the door’s spring tension or propping the door safely, and the torsion spring and cables on our doors hold dangerous energy. A door that slips during the job has crushed fingers and worse. We’d rather you didn’t test that. We’re insured and bonded, our technicians are background-checked, and every technician is up to 11 years into the trade. Call (844) 797-3654 and a real person will pick up, day or night, for emergency calls included.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Get Your Clopay Rollers Sorted

Technician repairing a garage door roller with pliers
Get Your Clopay Rollers Sorted

If your Clopay door has gone noisy, shaky, or stiff, a roller job may be all it needs, priced at $110 to $220 installed with a written quote before we touch anything. We answer live, 24/7, and we’ll photograph what we find so you can see the failed part yourself before you spend a dollar. In Summerlin and the surrounding neighborhoods, call (844) 797-3654 for a free estimate. We work on LiftMaster, Chamberlain, and Genie openers too, so everything on your door stays covered in one visit.

Written by the team at Servo Garage Doors Summerlin, serving Summerlin and nearby areas.

Need Garage Door help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 797-3654
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Servo Garage Doors Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch