A Servo company - serving Summerlin, NV

Craftsman Garage Door Parts in Summerlin, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Craftsman Garage Door Parts in Summerlin: What to Know First

Garage door parts for Craftsman openers and doors in Summerlin typically run $110 to $340 for the common failures (rollers, cables, springs), and most repairs are completed on the first visit because we carry the parts that fail most often. We’re an independent Craftsman service provider, which means we’ll tell you when a $14 roller solves the problem and when a $29 logic board clone is a bad idea. Every job gets a flat, written price before we touch anything.

Call (844) 797-3654

This page is for the homeowner who bought a house in Summerlin between 2015 and 2025, inherited a Craftsman opener mounted to the ceiling of a two- or three-car garage, and now needs to know what’s actually inside it before calling anyone. The number is (844) 797-3654. A live person answers, day or night.

How Craftsman Products Fail – and How We Fix Them

Craftsman openers and the doors they lift show specific failure patterns. Here are the ones we see most in Summerlin garages, named by part and by cause.

  • Logic board failure on 1/2-HP chain-drive units (the 139-series and similar). The symptom owners describe is a door that opens on the wall button but ignores the remotes, or a light that stays on and a motor that clicks without moving. That’s usually not the remote and not the safety sensors – it’s the logic board or the receiver chip on it. We test the board with a meter before quoting a replacement, and on older units we tell you honestly whether a board is still available or whether the money is better spent on a new opener.
  • Trolley carriage and belt wear on belt-drive models. Belt-drive Craftsman openers are the quiet ones, which is why they show up in Summerlin homes with a bedroom above the garage. When the belt stretches, the door starts and stops a few inches short, or the carriage slaps the rail on the way down. A stretched belt and a worn trolley carriage are two different parts with two different prices, and we identify which one is failing before quoting.
  • Limit switch drift causing the door to reverse or stop short. If your Craftsman door closes partway and then goes back up, the limit switch that tells the opener where “fully closed” is has drifted. In Summerlin’s heat, the plastic travel-limit components on older units soften and shift over a season. This is a cheap fix when it’s caught early and a motor replacement when it’s misdiagnosed for a year.
  • Torsion spring fatigue on the door itself, independent of the opener. Craftsman-branded openers are rated for a door weight. When the torsion spring (the coiled spring on the shaft above the door) loses tension, the opener works harder than it was designed to and starts tripping its force limit. Homeowners blame the opener; the real culprit is the spring measuring below spec. We measure wire diameter and coil count and show you the number.
  • Bottom seal and weatherstripping failure from desert sun and monsoon dust. The rubber bottom seal and the side weatherstripping on a Summerlin door take UV and grit that inland homes don’t see at the same rate. A cracked bottom seal lets in dust and heat, and a worn side seal lets the door rattle. Both are inexpensive parts and both get replaced on the same visit as other work.

Two things worth knowing that you won’t find on Craftsman’s own site: first, a Craftsman opener that runs its light but won’t move is almost never the remote or the wall button – it’s the logic board or the capacitor, and testing costs nothing. Second, Summerlin’s summer heat accelerates the plastic limit-switch components and the door’s rubber seals faster than the manual’s maintenance schedule assumes, so a door that worked fine in a cooler climate needs its travel limits and seals checked annually here.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Our Craftsman Garage Door Parts Process

Technician performing professional garage door spring repair and maintenance
Our Craftsman Garage Door Parts Process

Every Craftsman job follows the same sequence, and you know the price before step three.

  1. 1
    The call. A live person answers, not a recording. You describe the symptom; we ask which Craftsman model is on the label (usually inside the opener housing or on the back panel) so the technician arrives with the right parts in mind. You get a named technician and an on-the-way text.
  2. 2
    Diagnosis in your garage. The technician tests the actual failed component – opener board, carriage, limit switch, spring, seal – with a meter and a tape, and photographs it before quoting a replacement. Clause 4 of The Haven Standard is why that photo exists.
  3. 3
    The parts decision. We quote a flat, written price and written scope, then explain the OEM-versus-aftermarket call for your specific part. Some parts are safety-critical (springs, cables, drums) and only get rated components. Others (rollers, hinges, bottom seal) are fine as quality aftermarket. You see the range and you approve it before any work begins.
  4. 4
    The repair. The technician installs the part, re-tensions springs and balances the door where relevant, and on openers re-sets the travel limits and force settings.
  5. 5
    The test. The door is cycled several times, the safety reverse is tested with an object in the path, and the opener is checked against its rated door weight.
  6. 6
    The record. You receive a documented photo record of what was found and what was done, plus the written warranty. The 365-Day Done Right Promise backs a repair that isn’t right.

On a Craftsman job specifically, we keep in mind that these are the openers most likely to have been installed by a previous owner or a builder, sometimes on a door they weren’t sized for. We check the opener-to-door match on every visit.

BeforeBefore
AfterAfter

What Craftsman Garage Door Parts Costs in Summerlin

These are the ranges Summerlin homeowners actually see. The price is written and agreed before any work starts, per Clause 1 of The Haven Standard.

Job Typical range
Roller replacement $110 – $220
Cable repair $130 – $250
Spring repair (torsion or extension) $180 – $340
Opener repair (logic board, limit switch, capacitor) $120 – $320
Opener installation (new unit) $250 – $550
Panel replacement $250 – $500
Track realignment $120 – $240
General garage door repair $150 – $600
New door installation $700 – $2,200

What moves the price: which part failed, whether it’s a safety-critical component (springs and cables carry the highest risk and the highest standards), and whether the opener needs re-calibration after the repair. A Craftsman logic board is a bigger line item than a Craftsman roller, and we say so upfront. Call (844) 797-3654 for a free estimate. The written price you get is the price you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Summerlin Homeowners Call Servo Garage Doors Summerlin for Craftsman Work

professional garage door repair service
Why Summerlin Homeowners Call Servo Garage Doors Summerlin for Craftsman Work

Because the documentation is the point. On every Craftsman call you get a photograph of the failed part, a written price before the work, and a written warranty after it – not a handshake and a promise. Our technicians have up to 11 years of experience and work to the same standard on every job.

The 365-Day Done Right Promise means a repair that isn’t right gets made right. Live phone coverage is 24 hours a day, 7 days a week, including holidays, and emergency calls are answered by a real person. Since 2015 we’ve made right over 18,000 garage doors, every one with a written price before work started.

Craftsman is one of eight major brands we service. We also work on LiftMaster, Chamberlain, and Genie openers, so if a builder mixed brands in your Summerlin garage, that’s a single visit, not two. Bring any written estimate from another company and we’ll give you a free second opinion.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Contact

Technician repairing a garage door roller with pliers
Contact

Call (844) 797-3654 for a free estimate on Craftsman garage door parts anywhere in Summerlin and the surrounding areas. A live person answers, day or night, and you’ll get the failed part photographed, the price written, and the work done right – or we make it right under the 365-Day Done Right Promise.

Written by the team at Servo Garage Doors Summerlin, serving Summerlin and nearby areas.

Need Garage Door help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 797-3654
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Servo Garage Doors Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch