A Servo company - serving Summerlin, NV

Wayne Dalton Garage Door Installation in Summerlin, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Wayne Dalton Garage Door Installation in Summerlin: What to Know First

Wayne Dalton garage door installation in Summerlin runs $700 – $2,200 for a new door, and most jobs are measured, ordered and scheduled within one to two weeks depending on the model line. We’re an independent Wayne Dalton service provider, which means we work on the door you own without any manufacturer authorization, and we quote a flat written price before a single bracket comes off the wall. If you’re comparing a replacement quote to a repair quote and want a real number range rather than a callback window, this page is for you. Call (844) 797-3654 and a live person answers, day or night.

Call (844) 797-3654

How Wayne Dalton Products Fail – and How We Fix Them

Wayne Dalton builds a good door. What we see in Summerlin homes is not a bad product but a product with known weak points that show up differently than they do on a Clopay or Amarr door. Here’s what we find, and what we do about it.

  • Model 9100 and 9600 torsion springs snapping at the coil. These are the two Wayne Dalton lines we replace most often in Summerlin’s older custom homes, and the spring is usually the reason. The wire fatigues along the coil, then lets go on the first cold morning of the season. We replace the spring with a matched pair rather than a single, and we set the cycle count so the same failure doesn’t come back in two years. Spring repair ranges $180 – $340, and we photograph the break before we quote anything.
  • Model 8500 and 8700 panel dents that don’t push out. The steel on these lines is a lighter gauge than the 9100, so a backed-into door often dents at a seam that can’t be worked flat. On a lighter panel, a Wayne Dalton panel replacement runs $250 – $500, but if two or more panels have failed we compare that against a full new door install. We show you both numbers with the written scope before you decide.
  • Wayne Dalton Torquemaster spring systems failing as a unit. Torquemaster uses a tension rod instead of a torsion spring, and when the internal spring lets go the whole assembly usually needs replacement, not a repair. Some techs won’t touch them and quote a full door instead. We convert Torquemaster to a standard torsion system, or replace the Torquemaster unit, and we tell you which one we recommend and why before the truck rolls.
  • Idrive and Quantum openers with dead logic boards. The older Idrive and Quantum units show up on Wayne Dalton doors all over Summerlin, and when the logic board fails the door becomes manual overnight. We diagnose the board rather than sell you a whole new opener, though if the unit is over a decade old a Chamberlain or LiftMaster replacement at $250 – $550 often makes more sense than chasing a board that’s been discontinued.
  • Track and roller wear on doors that face west. A west-facing Wayne Dalton door in Summerlin takes the afternoon sun hard. Rollers flat-spot, tracks drift out of plumb, and the door starts to bind. Roller replacement is $110 – $220 and track realignment $120 – $240. Catching it early is how you avoid a panel replacement later.
Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Our Wayne Dalton Garage Door Installation Process

Technicians preparing parts for professional garage door installation services.
Our Wayne Dalton Garage Door Installation Process

Every Wayne Dalton installation we do follows the same five steps, and you see each one in writing.

  1. 1
    Measure and document. We measure the opening, the headroom and the sideroom, then photograph the existing door, the springs and the opener. On a Wayne Dalton door, we also confirm the model line, because a 9100 and an 8500 take different hardware and different clearances.
  2. 2
    Decide OEM versus quality aftermarket. Some parts should stay OEM to keep your Wayne Dalton warranty intact; others are better served by a quality aftermarket part that outlasts the original. We name the part, name the brand and explain the trade-off in one plain sentence, then let you choose.
  3. 3
    Quote a flat written price. The written price and written scope come before any work starts. That’s Clause 1 of The Haven Standard, and it applies to a full install as much as a spring repair.
  4. 4
    Install and test. We balance the door, set the springs to the right tension, check the opener travel and test the safety reverse. The door should run smooth and quiet before we call it done.
  5. 5
    Deliver the photo record and clean up. You get the documented photo record of what we found and what we did, a written warranty, and a clean floor. Clause 4 is why the photos start before the quote and finish after the test.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
BeforeBefore
AfterAfter

What Wayne Dalton Garage Door Installation Costs in Summerlin

These are the ranges we quote in Summerlin, and they hold. A single-car Wayne Dalton install lands in our standard door range of $700 – $2,200, with a double-car door and a custom build toward the upper end. Here’s how the numbers break down:

Job Typical Range
New single-car door installation $700 – $1,400
New double-car door installation $1,200 – $2,200
Custom Wayne Dalton door $2,000 – $2,200
Panel replacement (Wayne Dalton steel) $250 – $500
Opener installation (LiftMaster, Chamberlain, Genie) $250 – $550

What moves the price is the door width and insulation, the material (steel versus wood), the opener, and whether the existing track can stay. Wood doors cost more than steel and need a different install approach. We give you the flat written price with the scope before any work starts, so the invoice matches the quote. No coupon needed. Call (844) 797-3654 for a free estimate.

Why Summerlin Homeowners Call Servo Garage Doors Summerlin for Wayne Dalton Work

Technician performing professional garage door spring repair and maintenance
Why Summerlin Homeowners Call Servo Garage Doors Summerlin for Wayne Dalton Work

Servo Garage Doors Summerlin has delivered written prices before work started on 18,000+ garage doors since 2015, and every one of those jobs closed with a documented photo record in the customer’s hands. We’re independently owned and operated under The Haven Standard, which means every technician is background-checked and uniformed, the license number is printed on the estimate rather than buried in the fine print, and the 365-Day Done Right Promise means if a job isn’t right we come back and make it right. We work on all the major brands, including LiftMaster, Chamberlain and Genie, so if your Wayne Dalton door shares the garage with a different opener we handle both. Our technicians have up to 11 years of experience. Bring us a written estimate from another company and we’ll give you a free second opinion on it.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Garage Door help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 797-3654
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Servo Garage Doors Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch