Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Summerlin
If your builder-grade garage door is grinding, reversing halfway up, or leaving daylight under the bottom seal, the parts behind it have reached the end of their rating. We work Summerlin homes every week, from Sun City Summerlin and The Trails to The Ridges, and we know the stock here: post-1990 tract and semi-custom homes with original steel raised-panel doors that are now 25 to 35 years old. That means the torsion spring, rollers, hinges and weatherstripping are all hitting end of life at roughly the same time. Call (844) 797-3654 and we’ll name the price range before anyone touches the door.
Why Servo Garage Doors Summerlin Is Summerlin’s Preferred Garage Door Parts Company
We’re independently owned and operated under The Haven Standard, and the standard is simple: a flat, written price and written scope before any work starts, and a documented photo record of what we found and what we did before we leave. That founding rule, codified as Clause 4, is why the technician photographs the failed component before quoting a replacement. You see the broken spring, the flat-spotted roller, the cracked drum. Then you get the number.
Summerlin homeowners read the three-star reviews before they call anyone, so we put the price range on the page rather than hiding behind “call for a quote.” Every visit ends with the same documentation package: photos, written scope, and a 365-Day Done Right Promise that means if a repair isn’t right, we make it right. No coupon, no code, no fine print on the promise. Just a terms page.
Local knowledge matters more than any claim about how long we’ve been around. Because Summerlin was built village-by-village under Howard Hughes from 1990 onward, each sub-association carries its own design-review rules, and we plan for approvals before parts get ordered. We also account for the 4,000-foot desert edge: triple-digit summer heat and intense UV on south- and west-facing doors bake lubricant off rollers and springs, while the occasional winter overnight freeze stiffens openers and stresses old springs. Our technicians have up to 11 years of experience and they size spring cycle ratings for that wear, not for a generic install.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Summerlin

Torsion Spring
Torsion spring repair in Summerlin typically runs $180 – $340 and is quoted before any work begins. The torsion spring is the coiled steel bar above the door that carries the door’s weight, 150 to 350 pounds depending on the size of the opening. When the original builder-grade spring hits its 10,000-cycle rating, the opener starts fighting that weight and strains or reverses halfway up. That’s a spring symptom, not an opener failure. We match the replacement spring to the door’s weight and to the cycle rating a desert-UV home needs, and we photograph the clean break at the coil so you know exactly what failed. Never adjust a torsion spring yourself; the stored tension can cause serious injury, and a trained technician has the winding bars and the calibration to do it safely.
Extension Spring
Extension springs run along the sides of the door and stretch rather than twist. On the older semi-custom builds scattered through the early Summerlin villages, they’re common and often original. When one lets go, it releases energy sideways, which is why we recommend the safety-cable upgrade on any extension-spring door we touch. Replacement is typically included in a spring service range of $180 – $340 depending on the door and spring configuration.
Cables & Drums
Cables and drums are what transfer the spring’s lift to the door, and they run on the same UV timeline as everything else here. Cable repair in Summerlin runs $130 – $250. A frayed cable or a worn drum shows up as a door that rises crooked or binds on one side. High-tension cables under load should never be handled without proper tools, so this is work for a trained tech, not a weekend project.
Rollers & Hinges
Roller replacement in Summerlin runs $110 – $220, and it’s the single most common fix we make on post-1990 builder doors. UV bakes the lubricant off nylon rollers, produces flat spots, and leaves the hinges dry. You hear it as grinding and jerky travel before anything breaks. Fresh sealed-bearing rollers and lubricated hinges restore smooth, quiet movement.
Weatherstripping & Bottom Seal
South- and west-facing doors take the brunt of the desert sun, which hardens the bottom seal and shrinks the perimeter weatherstripping. Replacing both seals the gap that lets dust and summer heat into an attached garage. We fold this into the same visit as a roller or spring service, so you’re not paying a second trip charge for a $20 part.
Before
AfterTrusted Brands We Service in Summerlin
We service LiftMaster, Chamberlain, Genie and Clopay, along with Amarr, Wayne Dalton, Craftsman and Raynor. That covers nearly every builder-install in Summerlin, from the original steel doors on the earliest villages to the newer semi-custom builds. We don’t stock parts on a truck, but we can source what your door needs and turn most repairs around quickly. When a part has to be ordered, you’ll know the lead time before we schedule the return visit, and the written price holds to the scope. If it’s a Wi-Fi opener upgrade you’re after, whether a LiftMaster myQ or a Chamberlain smart unit, we quote it the same way: flat price, written scope, no surprises.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Parts Problems We See in Summerlin Homes

- Original 1990s torsion spring at end of life. On early-village tract homes, the builder-grade spring reaches its 10,000-cycle rating and leaves the opener to fight a 150 – 350 lb door before the spring visibly breaks. The opener gets blamed; the spring is usually the culprit.
- UV-baked rollers and hinges. South- and west-facing doors lose lubricant to the desert sun, producing grinding, jerky travel and flat-spotted nylon rollers. It’s a slow wear issue that shows up as noise long before failure.
- HOA design-review re-orders. Because Summerlin was built out village-by-village under Howard Hughes, each sub-association carries its own design rules. A replacement panel or door ordered in the wrong community-approved color or window pattern has to be re-ordered, which stalls the repair for weeks. This is where a local pro earns their keep.
- Hardened bottom seal and weatherstripping. The intense summer sun bakes the seals brittle and lets dust and heat into the garage. Cheap part, big comfort difference, and best folded into another service visit.
One pattern repeats often enough to explain. On the earliest Summerlin villages, a builder-grade steel raised-panel door installed in the 1990s now runs on its original torsion spring, and the opener starts straining or reversing halfway up. The standard job is a matched torsion spring rated for the right cycle count, fresh rollers and hinges, then a door balance check and a photo-eye sensor test. South- and west-facing doors also show faded paint and hardened weather seal, so bottom seal and weatherstripping usually get replaced in the same visit. That’s a full door-health tune-up, not a one-part swap, and it’s what most of these doors actually need.
The other thing that sets Summerlin apart is the approval path. The same 16×7 sectional door replacement in The Ridges and in Sun City Summerlin can require different color and window-pattern approvals before parts or panels are ordered. A generic parts page never mentions this. We do, because getting it wrong costs you a re-order and a stalled repair. See our Garage Door Parts team for the full parts menu, and our Garage Door Parts in Summerlin page for the village-by-village detail.
Pricing for Garage Door Parts in Summerlin, NV
Here’s the actual range for Summerlin, in dollars, before any work starts. These are line-item prices for the parts and labor involved, not teaser rates. What moves a job toward the top of a range is door size, spring cycle rating, whether panels need matching to a community-approved color, and how many parts are worn at once on a 25-to-35-year-old door.
| Service | Summerlin Price Range |
|---|---|
| Torsion Spring | $180 – $340 |
| Cables & Drums | $130 – $250 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
| Garage Door Repair | $150 – $600 |
You get a flat, written price and written scope before we start, per Clause 1 of The Haven Standard. The price doesn’t change once you’ve agreed to it. Bring a written estimate from another company and we’ll give you a free second opinion on the paperwork. Call (844) 797-3654 for an exact quote; estimates are free.
We Also Serve Cities Near Summerlin

We work homes throughout Summerlin and the surrounding Valley, including Spring Valley, Las Vegas, Winchester and Paradise. If you’re just outside a Summerlin village boundary, call and we’ll confirm coverage and the response window for your area. The same written-price-first system and documented photo record apply everywhere we work.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Summerlin

It’s usually the spring, not the opener. A torsion spring carries the 150 – 350 lb door weight, and once the original builder-grade spring hits its cycle limit, the opener has to lift all that weight itself, which shows up as straining or reversing halfway up. The technician photographs the spring and measures it before quoting. For an exact price, call (844) 797-3654; estimates are free.
Yes, most Summerlin villages sit under a master or sub-association with design-review rules, so replacement panels or doors generally need approval for color and window pattern. Because each village’s sub-association sets its own rules, the same door can require different approvals in The Ridges versus Sun City Summerlin. We flag the approval path before parts are ordered so you don’t get stuck with a re-order. Call for a free estimate and we’ll walk through what applies to your community.
A spring rated for a higher cycle count than the original builder-grade spring, matched to your door’s exact weight. Desert heat and UV on a south- or west-facing door punish a standard-duty spring, so we size the cycle rating for that wear rather than swapping in the same grade that failed. Torsion spring work in Summerlin runs $180 – $340. Call (844) 797-3654 for a written quote.
UV bakes the lubricant off the rollers, hinges and drums, and the nylon rollers develop flat spots, which is what you hear as grinding and jerky travel. It’s wear, not a mystery, and it gets worse every summer until the rollers are replaced. Roller replacement in Summerlin runs $110 – $220. Call for a free estimate and we’ll quote the rollers and hinges together.
We service LiftMaster, Chamberlain, Genie and Clopay, plus Amarr, Wayne Dalton, Craftsman and Raynor, which covers nearly every builder-install in Summerlin. That includes smart-opener upgrades like a LiftMaster myQ or Chamberlain Wi-Fi unit, quoted with a flat written price and written scope before work starts. Call (844) 797-3654 for an exact quote.
Whether your door needs a matched torsion spring, a fresh set of rollers, or a full door-health tune-up, we’ll name the price range, show you the failed part, and leave you with a documented photo record. Call (844) 797-3654 for a free estimate on garage door parts in Summerlin. Every price is written and agreed before any work starts, every visit ends with a photo record, and the 365-Day Done Right Promise backs the repair.
Written by the team at Servo Garage Doors Summerlin.