Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Summerlin?
Panel replacement in Summerlin costs $250 – $500 for a typical single-section swap on a standard two-car garage door. That range covers the panel, labor, and disposal of the old section. A single dented or cracked bottom panel on a steel door usually lands near $250 – $320; matching a discontinued color or replacing two sections to keep the seams even pushes toward $450 – $500.
We quote a flat, written price before any work starts, not a range we tighten up after the door is apart. Clause 1 of The Haven Standard exists because “call for a quote” wastes everyone’s afternoon. You’ll know the number on paper first.
Key Takeaways
- Most Summerlin panel replacements run $250 – $500, all-in.
- The panel itself is often a small part of the bill; matching color and profile drives more of the price than the metal does.
- Sun exposure on south- and west-facing doors in The Ridges and Red Rock Country Club accelerates fading, which makes older panels harder to color-match.
- A photo of the failed section goes into your written record before we quote the replacement, per Clause 4.
- One panel sometimes costs less than the labor to hide the mismatch. We’ll tell you when it does.
Panel Replacement Cost Breakdown (2026)
Here’s how the $250 – $500 range breaks apart for a Summerlin garage door. These are the numbers we work from, not a teaser that grows once the door is down.
| Line item | Typical price | What it covers |
|---|---|---|
| Single steel panel (bottom section) | $250 – $340 | One non-insulated or lightly insulated section, standard profile |
| Insulated steel panel | $320 – $460 | Foam- or polyurethane-core section, better for Summerlin’s summer heat |
| Two adjacent panels | $400 – $500 | Replacing two sections to keep horizontal seams aligned and color even |
| Wood-look or carriage-style panel | $380 – $500 | Stamped steel with a woodgrain finish, common in Toll Brothers builds |
| Panel plus minor hardware | add $40 – $90 | Hinges, roller brackets, or a bent stile found behind the damaged section |
| Old panel haul-away | included | We take the damaged section with us |
The panel itself usually runs a fraction of the job. What moves the price most is whether we can source a color and profile that matches your existing door. A builder-standard white or almond panel in a common profile is quick to find. A 2008-era color that’s been discontinued means either a longer lead time on a custom match or replacing two panels so the seam doesn’t show, and that second option is why a $280 job becomes a $480 job in Summerlin.
Insulation grade matters here more than it does in cooler markets. A west-facing door in Summerlin takes direct afternoon sun for hours, and a non-insulated panel transfers that heat into the garage. Upgrading to a foam-core section when a panel’s already coming off is often the smaller decision, and the more useful one, on a door that faces the sun.
What Affects Panel Replacement Pricing in Summerlin

- Color and profile match. Builder-standard colors (white, almond, sandstone) match cheaply. Something like a discontinued taupe from a mid-2000s build in The Trails may need a custom order or a two-panel swap. This single factor accounts for most of the spread between a $250 job and a $500 one.
- Panel position. Bottom panels take the most abuse (car bumps, irrigation overspray, curb impacts) and are usually the cheapest to swap. Middle sections are also easy. A top section sometimes means adjusting the track to get it out, adding $40 – $80.
- Door material. Steel is the volume item and priced accordingly. A wood-look stamped panel costs more because the finish has to match grain direction as well as color, and full wood sections cost the most.
- Insulation grade. Swapping a non-insulated panel for a foam-core one adds $70 – $120 per section. Worth knowing: a polyurethane-core door in a Summerlin garage runs measurably cooler than a hollow one, and if you’re replacing a panel anyway the added insulation is the cheaper half of the decision.
- Whether the damage is only cosmetic. A panel with a dent but a straight stile is a straightforward swap. A panel that’s bowed and has pulled the hinge out of the stile usually means inspecting the track and rollers too, and that can add track realignment to the bill.
- Door age and availability. Homes built across Summerlin between 2015 and 2025 mostly run common profiles, so panels are easy to source. Older doors, less so. We’ll tell you the lead time before you commit, not after.
Sun and heat do more panel damage here than most homeowners expect. In neighborhoods like Sun City Summerlin, where many doors have been baking in the same orientation for years, we regularly see faded and chalky paint on the south-facing panels while the north side still looks new. That fade makes a perfect color match harder, because a new panel out of the box won’t match a sun-bleached door. That’s a conversation we’ll have with a photo in hand, not a guess.
If you want the full picture of what panel work involves beyond cost, our panel replacement in Summerlin page covers the process and what we check when we’re on site.
Before
AfterHow to Save on Panel Replacement
The biggest savings on panel work come from knowing when you don’t need a new panel at all, and when one panel is the whole answer instead of three.
- Repair the dent, not the panel, if the structure’s sound. A shallow dent with a straight stile can sometimes be worked out or touched up. That’s a smaller bill than a replacement, and worth asking about before agreeing to a swap. We’ll say so if that’s the case.
- Replace only the damaged section when the color matches. The instinct to replace a whole row of panels “so it looks even” costs you $150 – $250 more than you need to spend on a common color. On a discontinued color, two panels is often the only way to make it look right, but on standard white, one is enough.
- Bring another written estimate. We offer a free second opinion on any competing written estimate you bring in. Bring the paperwork and we’ll tell you what the line items actually mean and whether the panel count is correct.
- Ask what’s included. A quote without haul-away, hardware, or a color-match lead time isn’t a finished price. Ours is flat and written, with the scope spelled out, so you can compare apples to apples.
- Time it before a bigger job. If the door’s also due for new rollers or a track adjustment, doing the panel and the hardware in one visit saves a second trip charge. Our garage door service covers everything a visit can address.
Every estimate is free and comes with a written price before anything is touched. Call (844) 797-3654 and we’ll get a number to you the same day.
How the Panel Replacement Process Works in Summerlin

Here’s what a panel job looks like from the driveway, start to finish, so you know what leaving looks like before we arrive.
- Photo of the failed section first. Before we quote a replacement, we photograph the damaged panel and the surrounding stiles, hinges, and track. Clause 4 of The Haven Standard exists because the customer should see the failed part before anyone quotes a replacement.
- Written price and written scope. You get a flat number and a clear list of what’s covered – panel, labor, hardware, haul-away – before work starts. Clause 1, every time, no exceptions.
- Source the matching panel. We confirm color and profile against your existing door’s stamp or documentation, and tell you the lead time if it’s not a stock item. This is where most of the price variability comes from.
- Release the door safely. Technicians trained on the door’s spring system relieve tension and secure the door before removing a section. Torsion springs and cables are under heavy load and are genuinely dangerous – this is not a step for a homeowner to take on, even on a job that looks small.
- Swap the panel and check alignment. We seat the new section, re-hinge, and check that the door travels true with no rubbing on the tracks. A slightly-off panel throws the whole door off balance, so alignment gets verified, not assumed.
- Documented photo record. You receive photos of what we found and what we did, with the written price and scope, tracing back to the founding rule Servo was built on. If anything isn’t right within 365 days, the Done Right Promise means we make it right.
We answer the phone live, 24/7, including holidays, and for emergency calls you get a real person and a named technician with an on-the-way text instead of a callback window. That matters most on a door that’s stuck open in a Summerlin monsoon afternoon with the garage full of gear.
Is It Cheaper to Repair a Panel or Replace It?
Replacing a single panel costs less than a full-door install in nearly every case: $250 – $500 against $700 – $2,200 for a new door. Repairing a bent hinge or straightening a stile can run less than a replacement when the panel skin itself is sound, so the question is really whether the metal is damaged or only the hardware around it. We check both and quote the smaller job when the smaller job is the correct answer.
If the panel skin is torn, cracked, or bowed enough to break the seal against the weatherstripping, replacement is the honest call. If it’s a dent with intact structure, a repair or a touch-up may be all you need. Call (844) 797-3654 and a technician can tell you which one you’re looking at, with a photo to show why.
FAQs – Panel Replacement Cost

How much does one garage door panel cost in Summerlin?
One panel typically costs $250 – $340 for a standard steel section installed, and $320 – $460 for an insulated foam-core section. The number includes the panel, labor, and haul-away. Color-matching to a discontinued profile can push it higher or require a two-panel replacement. Call (844) 797-3654 for an exact written quote on your door, free of charge.
Can I just replace the bottom panel of my garage door?
Yes, in most cases, and the bottom panel is the cheapest to swap at roughly $250 – $320. The bottom section takes the most damage from cars, irrigation overspray, and curb impacts, so it’s the most commonly replaced panel. The one catch is color match: on an older Summerlin door, a new bottom panel can look different from the sun-faded panels above it, and we’ll flag that before you approve the work. Call (844) 797-3654 to talk through whether one panel will look right.
Why does my Summerlin garage door panel fade faster on one side?
Southern and western sun exposure during Summerlin’s summer months breaks down paint and finish on the sun-facing panels first, so one side of the door can look years older than the other. This is common on south- and west-facing doors throughout the area. It also makes color-matching harder, because a brand-new panel won’t match the sun-bleached panels beside it. A photo of the fade difference is part of the record we build before quoting. Call (844) 797-3654 for a free look.
Does panel replacement include a warranty?
Yes. Panel work falls under our 365-Day Done Right Promise: if the replacement isn’t right, we make it right. Every visit also closes with a documented photo record of the findings and the completed work, delivered to you, so you have proof of what was done and when. Call (844) 797-3654 and we’ll explain the written terms before work starts.
How long does a panel replacement take?
A single-panel swap usually takes about one to two hours on site when the matching panel is in stock. If the color or profile has to be ordered, the job waits on the lead time, and we tell you that number up front instead of after you’ve paid a deposit. Emergency calls get answered live around the clock, and you’ll get a named technician and an on-the-way text. Call (844) 797-3654 to schedule and get a written price first.
Get a Written Price on Your Panel Replacement
Panel replacement in Summerlin runs $250 – $500 for most single-section jobs, and you’ll have that number on paper before any work starts. We photograph the failed panel, quote a flat written price and scope, and leave you with a documented record of what was found and what was done. Technicians have up to 11 years of experience, we service all eight major door brands, and our written terms are the whole point: you shouldn’t have to take our word for it when the paperwork will do. Call (844) 797-3654 for a free estimate, and if you’re holding a written estimate from another company, bring it in for a free second opinion.
Pricing reflects the Summerlin market as of 2026. Servo Garage Doors Summerlin offers free estimates – call (844) 797-3654.
What Our Customers Say
"Straightforward. They gave me the range over the phone, confirmed it in writing on site, and did not try to sell me anything else while they were here."
- Evan T."Cables came off the drum on a Sunday. Someone answered, someone came, and the written warranty was one page I could actually read."
- Harriet L."They sent a photo of the snapped torsion spring before quoting anything. Price on the estimate was the price on the invoice. I have never had that happen with a home repair."
- Dana W.